Document List: EO

Document List: Earth Observation

Summary

1. ALOS AVNIR-2 Level 1 Product Format Description
2. ALOS PRISM Level 1 Product Format Description
3. ALOS PALSAR Level 1 Product Format Description (Vol.1: Level 1.0)
4. ALOS PALSAR Level 1 Product Format Description (Vol.2: Level 1.1/1.5)
5. ALOS Data Users Handbook
6. Processors for ALOS Optical Data: Product Format Definition
7. EO SIP Specialization for ALOS High Level optical products for DSI
8. EO-SIP Specification for ALOS data
9. CEOS Guidelines on Standard Formats and Data Description Langages
10. COSMO-SkyMed Mission and Products Description
11. Digital Globe: WorldView-1 Product Quick Reference Guide
12. Digital Globe: QuickBird Imagery Products
13. DMC DATA PRODUCT MANUAL
14. DMC PRODUCT MANUAL FOR THE DMC EUROPE 2007 COVERAGE
15. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 7: AATSR PRODUCTS SPECIFICATIONS
16. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 8: ASAR PRODUCTS SPECIFICATIONS
17. ASAR PRODUCT SPECIFICATION UPDATE
18. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 9: DORIS PRODUCTS SPECIFICATIONS
19. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 10: GOMOS PRODUCTS SPECIFICATIONS
20. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 11: MERIS PRODUCTS SPECIFICATIONS
21. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 12: MIPAS PRODUCTS SPECIFICATIONS
22. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME : PRODUCTS SPECIFICATIONS
23. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 14: RA-2 PRODUCTS SPECIFICATIONS
24. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 15: SCIAMACHY PRODUCTS SPECIFICATIONS
25. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 16: AUXILIARY DATA FILES
26. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
27. ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION
28. EROS Imagery Products Guide
29. EROS Metadata specifications
30. ERS Ground Stations Products specification
31. IRS-1C/1D/P6 DIGITAL DATA PRODUCTS FORMAT FOR REVISION C FAST FORMAT PRODUCTS
32. IRS-1C/1D DIGITAL DATA PRODUCTS FORMAT FOR REVISION C FAST FORMAT PRODUCTS
33. GeoEye Product Guide
34. Ikonos Imagery Products and Product Guide
35. Level 1 Product Output Files Data Format Control Book, Volume 5, Book 2
36. Landsat TM/ETM+ ESA Products CEOS Format Specification
37. LANDSAT 8 (L8) – LEVEL 1 (L1) – DATA FORMAT CONTROL BOOK (DFCB)
38. LANDSAT 8 (L8) – LEVEL 1 (L1) – DATA FORMAT CONTROL BOOK (DFCB) (old V 9.0)
39. LANDSAT 8 (L8) – DATA USERS HANDBOOK
40. MDPS Systems: Transcribed Data Format on DLT
41. Pleiades Imagery User Guide
42. PLEIADES-HR Products Requirements
43. RADARSAT Data Products Specifications
44. RADARSAT-2 PRODUCT FORMAT DEFINITION
45. RADARSAT-2 PRODUCT FORMAT DEFINITION (old V 1.5)
46. RAPIDEYE IMAGERY PRODUCT SPECIFICATIONS
47. Sentinel SAFE Control Book – Volume 1 – Core Specifications
48. Sentinel-1 Level-0 Product Format Specifications
49. Sentinel-1 Product Specification
50. Sentinel-1 Product Specification (old V 2.6)
51. Sentinel-2 Products Specification Document
52. Sentinel-2 Products Specification Document (old V 14.4)
53. Sentinel-2 Products Specification Document (old V 14.1)
54. Sentinel-2 Level 2A Product Format Specification
55. Sentinel-2 Level 2A Product Format Specification (old V 14.2)
56. Sentinel-2 L2A Product Definition Document
57. GMES SPACE COMPONENT: SENTINEL-2 PAYLOAD DATA GROUND SEGMENT (PDGS): PRODUCT DEFINITION DOCUMENT
58. Sentinel-3 Core PDGS Instrument Processing Facility (IPF) Implementation: Product Data Format Specification – Product Structures
59. Sentinel-3 User Handbook
60. Sentinel-3 PDGS File Naming Convention
61. Sentinel-3 Core PDGS Instrument Processing Facility (IPF) Implementation – Product Data Format Specification – Level 0 Products
62. Sentinel-5P Input/output data specification for the TROPOMI L01b data processor
63. Sentinel-5P Metadata specification for the TROPOMI L1b products
64. Sentinel-5P TROPOMI Level 2 Product User Manual – UV Aerosol Index
65. Sentinel-5P TROPOMI Level 2 Product User Manual – Support products (FRESCO)
66. Sentinel-5P TROPOMI Level 2 Product User Manual – Aerosol Layer Height
67. Sentinel-5P TROPOMI Level-2 Product User Manual – Nitrogen Dioxide
68. Sentinel-5P TROPOMI Level 2 Product User Manual – Ozone Profile and Tropospheric Profile
69. Sentinel-5P TROPOMI Level 2 Product User Manual – Carbon Monoxide
70. Sentinel-5P TROPOMI KNMI and SRON level 2 Input Output Data Definition
71. Sentinel-5P TROPOMI Level 2 Product User Manual – Cloud Properties
72. Sentinel-5P TROPOMI Level 2 Product User Manual – Formaldehyde HCHO
73. Sentinel-5P TROPOMI Level 2 Product User Manual – Sulphur Dioxide SO2
74. Sentinel-5P TROPOMI Level 2 Product User Manual – Ozone Tropospheric Column
75. Sentinel-5P TROPOMI Level 2 Product User Manual – Ozone Total Column
76. Sentinel-5P Level 2 UPAS Processor Input / Output Definition Document
77. Sentinel 5 precursor/TROPOMI KNMI and SRON level 2 Input Output Data Definition
78. RINEX – The Receiver Independent Exchange Format
79. RINEX – The Receiver Independent Exchange Format (old V 3.00)
80. Sentinels POD Service File Format Specifications
81. Sentinels POD Service File Format Specifications (old V 1.22-Draft)
82. External Auxiliary Data Providers to Sentinels POD Service ICD
83. Copernicus POD Service (CPOD) Service Level Agreement
84. The SPOT Scene Standard Digital Product Format
85. Dimap Dictionary SPOT Scene profile Version 1.1.2
86. Schema: SPOT Scene
87. SPOT SATELLITE GEOMETRY HANDBOOK
88. TerraSAR-X Science Plan
89. TerraSAR-X Ground Segment Basic Product Specification Document
90. TerraSAR-X Ground Segment Basic Product Specification Document (old V 1.2)
91. TerraSAR-X Ground Segment Level 1b Product Format Specification
92. TerraSAR-X Ground Segment Level 1b Product Format Specification (old V 1.1)
93. TerraSAR-X Ground Segment Level 1b Product Format Specification (old V 1.2)

ALOS AVNIR-2 Level 1 Product Format Description

ALOS-DPFT-E02 – Revision J – 2006-10-06

This document describes a format of the AVNIR-2 (Advanced Visible Near-Infrared Radiometer) products generated by the ALOS Data Processing Subsystem. The AVNIR-2 Processing Software accepts Level 0 data, performs radiometric and geometric corrections, and generates Level 1A, Level 1B1, and level LB2 products.

format.htm (Web)
AVNIR2_L1_J_ENa.zip (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

ALOS PRISM Level 1 Product Format Description

ALOS-DPFT-E01 – Revision J – 2006-10-06

This document describes a format of the PRISM (Panchromatic Remote sensing Instrument for Stereo Mapping) products generated by the ALOS Data Processing Subsystem. The PRISM Processing Software accepts Level 0 data, performs radiometric and geometric corrections, and generates Level 1A, Level 1B1, and Level 1B2 products.

format.htm (Web)
PRISM_L1_J_ENa.zip (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

ALOS PALSAR Level 1 Product Format Description (Vol.1: Level 1.0)

ALOS-DPFT-E03 – Revision J – 2006-10-06

This document describes a format description of PALSAR Level 1.0 data generated by ALOS Data Processing Subsystem. PALSAR Level 1.0 data is processed from PALSAR Level 0 data distributed by ALOS Central Information Subsystem. PALSAR Level 1.0 products are defined by scene ID and scene shift using orbit frame number.

format.htm (Web)
PALSAR_L10_J_ENa.zip (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

ALOS PALSAR Level 1 Product Format Description (Vol.2: Level 1.1/1.5)

ALOS-DPFT-E04 – Revision L – 2009-07-21

This document describes the products specifications for ALOS PALSAR data. The product specification formats are based on the CEOS (Committee on Earth Observation Satellites) revised standardized formats.

PALSAR_x_Format_EL.pdf (Web)
PALSAR_x_Format_EL.pdf (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

ALOS Data Users Handbook

Revision C – 2008-03

The purpose of this document is to provide various information needed for users to effectively use data obtained through ALOS. We introduce not only various information related to standard products, but also information related to ALOS itself, as well as other related information about the sensors on the Satellite and the ground systems.

ALOS_HB_RevC_EN.pdf (Web)
ALOS_HB_RevC_EN.pdf (GAEL Systems)

Processors for ALOS Optical Data: Product Format Definition

ALOS-TN-120 – Revision 1.6 – 2014-08-18

This document presents the ALOS GeoTIFF format structure, and the content of the ALOS DIMAP files.

ALOS-TN-120_Product_Format_Definition_V1.6.pdf (GAEL Systems)
GeoTIFF Format Specification – GeoTIFF Revision 1.0

EO SIP Specialization for ALOS High Level optical products for DSI

ESA-EOPG-GSDEV-TN-0012 – Revision 1.1 – 2016-02-03

This document is the specialization of the EO SIP-Stripline Generic Specification (PGSI-GSEG-EOPG-TN-13-0014, version 1.0.2, 09/07/2014) for ALOS L1B1 and L1C optical products to be generated by the DSI.
List of supported product types:

• AV2_OBS_11
• PSM_OB1_11
• PSM_OB2_11
• AV2_OBS_1C
• PSM_OB1_1C
• PSM_OB2_1C

EO SIP Specialization for ALOS optical HL for DSI_v1.1.1.docx (GAEL Systems)

EO-SIP Specification for ALOS data

PDGS-ALOS-GMV-TN-13-0004 – Revision 2.5 – 2015-06-24

This document is the EO-SIP specification Document for ALOS PDGS. It describes the EO-SIP package structure and contents for the ALOS Data to be archived in the ALOS PDGS CSA subsystem.

PDGS-ALOS-GMV-TN-13-0004_v2.5_EO-SIP_Specification_for_ALOS.docx (GAEL Systems)

CEOS Guidelines on Standard Formats and Data Description Langages

CEOS.WGISS.DS.TN01 – Revision 1.0 – 1998-05-18

This document provides an analysis and critique of a number of standard formatting techniques that are applicable for the formatting and delivery of digital data.
The document describes the basic concepts needed to understand the following sections; provides an analysis of the various Standard Data Formats available; provides an analysis of the various Data Description Languages available; discusses other aspects related to format systems; gives additional information on the two major format systems; gives the conclusions and recommendations.

Format%20Guidelines.doc (Web)
Format Guidelines.doc (GAEL Systems)

COSMO-SkyMed Mission and Products Description

ASI-CSM-PMG-NT-001 – Revision 2 – 2016-05-31

This document provides the COSMO-SkyMed Users with a System Description giving an overview of the Constellation’s main characteristics and performances, and is to provide COSMO-SkyMed System Users with a SAR Product Handbook giving a detailed description of the COSMO SAR Products (Standard L0, L1A, L1B, L1C and L1D products, and Higher level products).

cosmo-skymed_mission_and_products_description_update_2.pdf (Web)
cosmo-skymed_mission_and_products_description_update_2.pdf (GAEL Systems)

Digital Globe: WorldView-1 Product Quick Reference Guide

Revision 2.1 – 2009-07-20

This document provides basics about WorldView-1 platform, format and products.

WV-1_Product_QR_Guide.pdf (GAEL Systems)

Digital Globe: QuickBird Imagery Products

Revision 4.7.2 – 2006-10-18

This document provides information about QuickBird platform, format and products.

QuickBirdImageryProducts-ProductGuide-4.7.2.pdf (GAEL Systems)

DMC DATA PRODUCT MANUAL

WMCO-0115056-01 – Revision 01 FINAL – 2008-06-27

The data products supplied by DMCII are derived from images acquired by the DMC satellites. The
primary payload on the DMC satellites is the SLIM-6 imager manufactured by SSTL, UK.
This manual will aid users in their analysis of the data products to maximise the information they can
extract from the DMC images by providing a thorough description of the data products, the imaging
payload, the calibration procedure and the orthorectification process.

DMC Data Product Manual.pdf (GAEL Systems)

DMC PRODUCT MANUAL FOR THE DMC EUROPE 2007 COVERAGE

WMEA-0115052-01 – Revision 01 FINAL – 2008-06-27

The data products supplied by DMCII are derived from images acquired by the DMC satellites. The
primary payload on the DMC satellites is the SLIM-6 imager manufactured by SSTL, UK.
This manual will aid users in their analysis of the data products to maximise the information they can
extract from the DMC images by providing a thorough description of the data products, the imaging
payload, the calibration procedure and the orthorectification process.

DMC_Europe_Coverage_2007_Product_Manual.pdf (GAEL Systems)

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 7: AATSR PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 4C – 2013-09-05

This document specifies the ENVISAT-1 AATSR products:

• ATS_NL__0P: AATSR Level 0
• ATS_TOA_1P: AATSR Gridded Brightness Temperature and Radiance product. Full Resolution for all channels/both views.
• ATS_NR__2P: AATSR Geophysical Product for Ocean, Land and Atmosphere (AATSR L2P) (AATSR L2P Product generated by the L2P Processor; this product has been replaced by ARC L2P)
• ATS_AR__2P: AATSR Spatially Averaged Sea/Land Geophysical product
• ATS_MET_2P: AATSR Spatially Averaged Sea Surface Temperature for Meteo users.
• ARC L2P ARC: L2P Product generated by the ARC_L2P Processor
• ARC L3U ARC: L3U Product generated by the ARC_L2P Processor
• ATS_AST_BP: AATSR Browse Product (3 colour composite)

Vol-07-Aats-4C.pdf (Web)
Vol-07-Aats-4C.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 8: ASAR PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 4C – 2012-01-20

This document specifies the ENVISAT-1 ASAR products:

• ASA_EC__0P: ASAR Level 0 External Characterization
• ASA_MS__0P: ASAR Level 0 Module Stepping Mode
• ASA_WV__0P: ASAR Level 0 Wave Mode
• ASA_WVI_1P: Wave Mode SLC Imagette and Imagette Cross Spectra
• ASA_WVS_1P: Wave Mode Imagette Cross Spectra
• ASA_WVW_2P: Wave Mode Ocean Wave-Spectra Product
• ASA_GM__0P: ASAR Level 0 Global Monitoring Mode
• ASA_GM1_1P: Global Monitoring Mode Image (stripline)
• ASA_GM__BP: Global Monitoring Mode Browse Product (stripline)
• ASA_IM__0P: ASAR Level 0 Image Mode
• ASA_IMS_1P: Image Mode SLC Image
• ASA_IMP_1P: Image Mode Precision Image
• ASA_IMG_1P: Image Mode Geocoded Image
• ASA_IMM_1P: Image Mode Medium Resolution Image (stripline)
• ASA_IM__BP: Image Mode Browse Product (stripline)
• ASA_APH_0P: ASAR Level 0 Alternating Polarization (Xpolar H)
• ASA_APV_0P: ASAR Level 0 Alternating Polarization (Xpolar V)
• ASA_APC_0P: ASAR Level 0 Alternating Polarization (Copolar)
• ASA_APS_1P: Alternating Polarization SLC Image
• ASA_APP_1P: Alternating Polarization Precision Image
• ASA_APG_1P: Alternating Polarization Geocoded Image
• ASA_APM_1P: Alternating Polarization Medium resolution Image (stripline)
• ASA_AP__BP: Alternating Polarization Mode Browse Product (stripline)
• ASA_WS__0P: ASAR Level 0 Wide Swath
• ASA_WSS_1P: Wide Swath Mode SLC Image
• ASA_WSM_1P: Wide Swath Mode Medium Resolution Image (stripline)
• ASA_WS__BP: Wide Swath Mode Browse Image (stripline)

Vol08_ASAR_4C_20120120.pdf (Web)
Vol08_ASAR_4C_20120120.pdf (GAEL Systems)
ASAR PRODUCT SPECIFICATION UPDATE
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ASAR PRODUCT SPECIFICATION UPDATE

IDEAS-BAE-SOM-REP-0868 – Revision 1.1 – 2013-03-05

The latest version of the Envisat ASAR processor, PF-ASAR v6, was transferred to operations within the ESA ground segment on the following dates: at ESRIN on 10th December 2012, at Kiruna on 3rd January 2013, at D-PAC on 9th January, at the I-PAC on the 29th January and at the UK-PAC on 21st February 2013.
The PF-ASAR v6 product includes three new sets of Level 1 product header information (including an increased size of Main Processing Parameters (MPP) ADS) and a modification of the processor configuration file ASA_CON_AX. This note provides information of the additional header information to enable the user to include this in their analysis software.

asar_Product_Specification_Update_v1.1.pdf (Web)
asar_Product_Specification_Update_v1.1.pdf (GAEL Systems)

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 9: DORIS PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 3B – 2008-01-29

This document specifies the ENVISAT-1 DORIS products:

• DOR_NAV_0P: DORIS Navigator Level 0
• DOR_DOP_0P: DORIS Doppler Level 0
• DOR_DOP_1P: DORIS Doppler Level 1B
• DOR_POR_AX: DORIS Preliminary Orbit
• DOR_VOR_AX: DORIS Precise Orbit

Vol09_Doris_3b.pdf (Web)
Vol09_Doris_3b.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 10: GOMOS PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 3K – 2012-10-15

This document specifies the ENVISAT-1 GOMOS products:

• GOM_NL__0P: GOMOS Nominal Mode Level 0
• GOM_MM__0P: GOMOS Monitoring Modes (either Linearity, Uniform, or Spatial Spread data) GOM_TRA_1P Geolocated and Calibrated Transmission Spectra and Fast Photometer Fluxes
• GOM_LIM_1P: Geolocated and Calibrated Background Spectra
• GOM_NL__2P: Temperature and Atmospheric Constituent profiles
• GOM_EXT_2P: Residual Extinction Product
• GOM_RR__2P: Extracted Profiles for Meteo Users contains extracted profiles at reduced spatial resolution for NRT dissemination to Meteo users

04_Vol10_Gomos_3K_v7.pdf (Web)
04_Vol10_Gomos_3K_v7.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 11: MERIS PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 6A – 2011-06-22

This document specifies the ENVISAT-1 MERIS products:

• MER_RV__0P MERIS Level 0 Reduced Field of View
• MER_CA__0P MERIS Level 0 Calibration (all calibration modes)
• MER_RR__0P MERIS Level 0 Reduced Resolution
• MER_RR__1P Reduced Resolution Geolocated and Calibrated TOA Radiance (stripline)
• MER_RR__2P Reduced Resolution Geophysical Product for Ocean, Land and Atmosphere (stripline)
• MER_LRC_2P Extracted Cloud Thickness and Water Vapour for Meteo Users Level 2 Product generated from
• MER_RR__2P (Cloud thickness and water vapour content for the Meteo at reduced resolution > 5 km) (stripline)
• MER_RRC_2P Extracted Cloud Thickness and Water Vapour (non- Meteo Users) Level 2 product extracted from
• MER_RR__2P (Cloud thickness and water vapour content at nominal RR resolution) for NRT distribution (stripline)
• MER_RRV_2P Extracted Vegetation Indices Level 2 product extracted from MER_RR__2P (Vegetation indices including atmospheric corrections for selected land regions) for NRT distribution (stripline)
• MER_RR__BP Browse (covers FR and RR requirements) (stripline)
• MER_FR__0P MERIS Level 0 Full Resolution
• MER_FR__1P Full Resolution Geolocated and Calibrated TOA Radiance
• MER_FR__2P Full Resolution Geophysical Product for Ocean, Land and Atmosphere
• MER_FRS_1P Full Resolution Full Swath Geolocated and Calibrated TOA Radiance
• MER_FRS_BP Full Resolution Full Swath Browse product
• MER_FRS_2P Full Resolution Full Swath Geophysical Product for Ocean, Land and Atmosphere

Vol11_Meris_6a.pdf (Web)
Vol11_Meris_6a.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 12: MIPAS PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 5B – 2015-05-19

This document specifies the ENVISAT-1 MIPAS products:

• MIP_RW__0P: MIPAS Raw Data and SPE Self Test Mode Data
• MIP_LS__0P: MIPAS Line of Sight Level 0
• MIP_NL__0P: MIPAS Nominal Level 0
• MIP_NL__1P: Geolocated and Calibrated Spectra
• MIP_NL__2P: Temperature, Pressure and Atmospheric Constituents Profiles
• MIP_NLE_2P: Extracted Temperature, Pressure and Atmospheric Constituents Profiles for Meteo Users (NRT dissemination only)

9a16749a-f8f9-405d-b64f-5e8ffeb420b8 (Web)
IDEAS-SER-IPF-SPE-0824_5B.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME : PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 –

envisat (GAEL Systems)

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 14: RA-2 PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 4C – 2009-01-30

This document specifies the ENVISAT-1 RA-2 products:

• RA2_CAL_0P: RA2 Calibration and BITE Mode Level 0
• RA2_ME__0P: RA2 Measurement Mode Level 0
• RA2_MW__1P: Geolocated and calibrated Altimeter Waveforms with TOA Microwave Brightness Temperatures
• RA2_FGD_2P: FDGDR: Fast delivery Geophysical Data record from RA-2 and Water Vapour/Liquid Content from MWR. Available 3 hours after data acquisition
• RA2_IGD_2P: IGDR: Intermediate Geophysical Data record from RA2 and Water Vapour/Liquid Content from MWR. Processed off-line and available 3-5 days after acquisition
• RA2_GDR_2P: GDR: Geophysical Data Record from RA-2 and Water Vapour/Liquid Content from MWR. Processed off-line and available 50 days after acquisition
• RA2_WWV_2P: FDMAR/IMAR: Wind/Wave product with height and MWR information for NRT dissemination to Meteocean users (2 products released at different levels of consolidation: FDMAR built from RA2_FGD_2P or IMAR built from RA2_IGD_2P)
• RA2_MWS_2P: SGDR: Sensor Geophysical Data Record from RA-2, Water Vapour/Liquid content from MWR and Individual Uncalibrated Waveforms from RA-2. Available after 50 days from data take.

Vol14_Ra2mwr_4C.pdf (Web)
Vol14_Ra2mwr_4C.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 15: SCIAMACHY PRODUCTS SPECIFICATIONS

PO-RS-MDA-GS-2009 – Revision 3M – 2016-04-30

This document specifies the ENVISAT-1 SCIAMACHY products:

• SCI_NL__0P: SCIAMACHY Level 0
• SCI_NL__1P: SCIAMACHY Level 1b, Geolocated, Radiometrically and Spectrally Calibrated radiance spectra for Nadir, Limb, and Occultation measurements. The Level 1b product is the lowest level of SCIAMACHY data delivered to the general user.
• SCI_NL__2P: SCIAMACHY Level 2, Geolocated vertical column amounts. Processing suspended in May 2006.
• SCI_OL__2P: SCIAMACHY consolidated Level 2, Geolocated vertical column amounts anf profiles from trace gas species, cloud-top pressure, cloud fractional cover and aerosols parameters.
• SCI_RV__2P: SCIAMACHY Level 2, Selected vertical column amounts. Processing suspended in May 2006.
• SCI_OL__2PN: SCIAMACHY fast-delivered Level 2, For Level 2 SGP version 5, the Fast Delivery operational processing chain was activated, generating products within 24 hours from acquisition.

PO-RS-MDA-GS-2009-Vol15-3M_1.pdf (Web)
PO-RS-MDA-GS-2009-Vol15-3M_1.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 16: AUXILIARY DATA FILES

PO-RS-MDA-GS-2009 – Revision 3G – 2007-11-20

This document specifies the ENVISAT-1 Auxiliary data files.
Auxiliary data files are all other data files used to produce a product other than the direct measurements of the instrument. This may include calibration data that was measured on-board but is not part of the main measurement data of the instrument. It may also include external calibration files from sources other than the satellite, processor configuration files, and any other files needed by instrument processors.

Vol16_Aux_data_files_3g.pdf (Web)
Vol16_Aux_data_files_3g.pdf (GAEL Systems)
ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 5: PRODUCT STRUCTURES

PO-RS-MDA-GS-2009 – Revision 3F – 2015-08-31

This document contains product general structures (MPH and SPH) description.
ENVISAT products will all follow a generalized structure consisting of:

• 1. the Main Product Header (MPH);
• 2. a Specific Product Header (SPH) containing information specific to the whole product plus one or more Data Set Descriptors (DSDs) which describe individual Data Sets;
• 3. One or more Data Sets (DSs), each consisting of one or more Data Set Records (DSRs).

Vol05_Structures_3f_20150831_v1.pdf (Web)
Vol05_Structures_3f_20150831_v1.pdf (GAEL Systems)

ENVISAT-1 PRODUCTS SPECIFICATIONS. VOLUME 6: LEVEL 0 PRODUCTS SPECIFICATION

PO-RS-MDA-GS-2009 – Revision 3C – 1998-10-16

This document specifies the ENVISAT-1 Level-0 products.
Level 0 product for all instruments, plus Housekeeping and Telemetry data, share a common format.
The Level 0 product contains Annotated Instrument Source Packets (AISPs). These are Instrument Source Packets as received from the instrument, with a small header attached by the Front-End Processor (FEP). In addition to the AISP, each MDSR of the Level 0 product contains a time stamp in MJD 2000 format which gives the on- board sensing time of that ISP which it contains (one MDSR per AISP)

vol06_3c.level_0_products_specification.pdf (Web)
vol06_3c.level_0_products_specification.pdf (GAEL Systems)

EROS Imagery Products Guide

2007-02

This document describes EROS mission and products.

EROS Imagery Products guide.pdf (GAEL Systems)

EROS Metadata specifications

2006-10-19

This document describes EROS products metadata.

EROS METADATA.pdf (GAEL Systems)

ERS Ground Stations Products specification

ER-IS-EPO-GS-0201 – Revision 3.1 – 2003-10-15

This document defines all outgoing products generated by the following ERS Ground Stations: Kiruna Station (KS), Fucino Station (FS), Maspalomas Station (MS), Gatineau Station (GS), Prince Albert Station (PA).

ER-IS-EPO-GS-0201.pdf (GAEL Systems)

IRS-1C/1D/P6 DIGITAL DATA PRODUCTS FORMAT FOR REVISION C FAST FORMAT PRODUCTS

2003-05

This document describes the format for IRS 1C/1D/P6 fast format digital data products.

irs-p6fast_20041027.pdf (GAEL Systems)

IRS-1C/1D DIGITAL DATA PRODUCTS FORMAT FOR REVISION C FAST FORMAT PRODUCTS

1998-08

This document describes the format for IRS 1C/1D fast format digital data products.

ff_IRS_1998.pdf (GAEL Systems)

GeoEye Product Guide

Revision 1.0.1 – 2009-02

This guide provides GeoEye’s customers with detailed information about GeoEye company and each of their imagery products including: product descriptions, product specifications, ordering and licensing.

GeoEye_Product_Guide.pdf (GAEL Systems)

Ikonos Imagery Products and Product Guide

Revision 1.4 – 2004-08

This guide provides information on IKONOS product levels, specifications, ordering and licensing.

IKONOS_Product_Guide.pdf (GAEL Systems)

Level 1 Product Output Files Data Format Control Book, Volume 5, Book 2

L7-DFCB-04 – Revision 5 – 2001-04

This Data Format Control Book (DFCB) presents detailed data formats of the output files generated by the Image Assessment System (IAS), the Level 1 Product Generation System (LPGS), and the National Land Archive Processing System (NLAPS). These Level 1 processing systems produce Level 1 output files from Level 0R images based on user requests. Images in the following formats are possible from the various Level 1 processing systems: Hierarchical Data Format (HDF), FAST-Landsat 7 (FAST-L7A), Geographic Tagged Image File Format (GeoTIFF), or NLAPS Data Format (NDF). IAS and LPGS do not generate products in NDF format.

L7-DFCB-04-DFCB_V5_B2_R5.pdf (GAEL Systems)

Landsat TM/ETM+ ESA Products CEOS Format Specification

GAEL-P157-DOC-003 – Revision 3.0 – 2003-04-18

This document describes the CEOS standards used by ESA for the distribution of the TM and ETM+ (Thematic Mapper and Enhanced Thematic Mapper) optical sensor products. It provides technical also details on the on the concept of family format. This is followed by a specification of the file classes which are commonly used on the CEOS standard, and an in-depth review of the organizational features of the file classes which are used for imagery, supplemental and calibration data.

GAEL-P157-DOC-003-03-00.SpecCEOS.pdf (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

LANDSAT 8 (L8) – LEVEL 1 (L1) – DATA FORMAT CONTROL BOOK (DFCB)

LSDS-809 – Revision 10.0 – 2016-05

This Data Format Control Book (DFCB) presents detailed data formats of the output files that the Landsat 8 Image Assessment System (IAS) and Level 1 Product Generation System (LPGS) generate. These Level 1 (L1) processing systems produce L1 output files from Level 0 Reformatted (L0R) images. Images are produced in the Geographic Tagged Image File Format (GeoTIFF) format.

LSDS-809_V10.0.pdf (Web)
LSDS-809_V10.0.pdf (GAEL Systems)

LANDSAT 8 (L8) – LEVEL 1 (L1) – DATA FORMAT CONTROL BOOK (DFCB) (old V 9.0)

LSDS-809 – Revision 9.0 – 2015-05

This Data Format Control Book (DFCB) presents detailed data formats of the output files that the Landsat 8 Image Assessment System (IAS) and Level 1 Product Generation System (LPGS) generate. These Level 1 (L1) processing systems produce L1 output files from Level 0 Reformatted (L0R) images. Images are produced in the Geographic Tagged Image File Format (GeoTIFF) format.

LSDS-809.pdf (GAEL Systems)

LANDSAT 8 (L8) – DATA USERS HANDBOOK

LSDS-1574 – Revision 2.0 – 2016-03-29

The purpose of this handbook is to provide a basic understanding and associated reference material for the L8 Observatory and its science data products.

Landsat8DataUsersHandbook.pdf (Web)
Landsat8DataUsersHandbook.pdf (GAEL Systems)

MDPS Systems: Transcribed Data Format on DLT

Revision 6.3 – 2005-01-26

A.C.S. stations for Ingestion, Archiving and Cataloguing of satellite data are based on Digital Linear Tape (DLT) units for long term archiving.
This document describes the data format of the transcribed data on the DLT cassette. The description is valid for Transcription Systems developed by A.C.S. for LANDSAT satellites (TM, MSS and ETM+ sensors), J-ERS 1 (SAR sensor), ERS 1-2 (SAR sensors), SPOT 1-2-3-4 satellites, Shuttle XSAR missions 1-2-3 (SRL 1, 2 and SRTM) and EOSAM/EOSPM mission 1 (MODIS sensor).

MDPS_DLT_Format_Standard_6.3.pdf (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

Pleiades Imagery User Guide

Revision 2.0 – 2012-10

The Pleiades Imagery User Guide provides essential information to the users about all Pleiades products and services. The document is divided into four main parts, followed by technical appendices. Chapter 1 details the Pleiades satellite system and its performances. Chapter 2 explains the different Pleiades products. Chapter 3 details product ordering. Chapter 4 presents product delivery. For the experienced users, several Technical Appendices complete the document by covering the following points: A. DIMAP V2 format B. Image quality performance C. Geometric modeling D. Spectral modeling

PleiadesUserGuide.pdf (Web)
PleiadesUserGuide.pdf (GAEL Systems)

PLEIADES-HR Products Requirements

PHR-ST-0-30-CNES – Revision 1.3 – 2005-09-06

PHR-ST-0-30-CNES (1-3-DM609).pdf (GAEL Systems)

RADARSAT Data Products Specifications

RSI-GS-026 – Revision 3.0 – 2000-05-08

The RADARSAT Data Product Specifications provides an overview of the endorsed products generated by the RADARSAT program. These products may be produced at the CDPF or at any of the RADARSAT Network Stations.
This document outlines the suite of available RADARSAT products, the product delivery options, and product attributes such as image quality, resolution and size. The CEOS format for RADARSAT data is also defined for each record in structure and contents.

RSI-GS-026 Ed 3 Rev 0.PDF (GAEL Systems)

RADARSAT-2 PRODUCT FORMAT DEFINITION

RN-RP-51-2713 – Revision 1.15 – 2016-10-26

This document defines the RADARSAT-2 product format for georeferenced and geocorrected (geocoded) products. Georeferenced products include slant range (SLC) and ground range (SGF, SGX, SGC, SCN, SCW, SCF, SCS) products. Geocorrected products include systematic (SSG) and precision (SPG) geocoded products.

radarsat-2-product-format-definition.pdf (Web)
radarsat-2-product-format-definition.pdf (GAEL Systems)

RADARSAT-2 PRODUCT FORMAT DEFINITION (old V 1.5)

RN-RP-51-2713 – Revision 1.5 – 2003-11-24

This document defines the RADARSAT-2 product format for georeferenced and geocoded products. These include SLC, SGF, SGX, SGC, SSG, and SPG products but not RAW products.

RN-RP-51-2713-RSAT-2-Product-Format-Definition-Iss1_5.pdf (GAEL Systems)

RAPIDEYE IMAGERY PRODUCT SPECIFICATIONS

Revision 6.1 – 2016-01

This document provides detailed information on the following subjects related to the RapidEye Satellite Imagery Products: RapidEye Satellite Constellation; Product Level Descriptions; Product and Delivery Options; Product Licensing; Product Naming; Product Delivery; Image Support Data.

160625-RapidEye%20Image-Product-Specifications.pdf (Web)
160625-RapidEye Image-Product-Specifications.pdf (GAEL Systems)

Sentinel SAFE Control Book – Volume 1 – Core Specifications

GAEL-P264-DOC-001 – Revision 1.3 – 2014-06-26

The present document provides the specifications of the Sentinel Standard Archive Format for Europe (Sentinel SAFE) developed by the European Space Agency in the framework of its Earth Observation ground segment activities.

GAEL-P264-DOC-001-01-03-20140627125411.pdf (GAEL Systems)
SAFE 1.3 Primer

Sentinel-1 Level-0 Product Format Specifications

S1PD.SP.00110.ASTR – Revision 1.7 – 2012-12-20

This document aims to provide the format specifications for Level 0 product generated in the framework of Sentinel-1 Payload Data Ground Segment (S1 PDGS) project.

Sentinel-1_Level-0_Product_Format_Specification.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-1 Product Specification

S1-RS-MDA-52-7441 – Revision 3.4 – 2017-03-10

This document defines the detailed product format for all Sentinel-1 Level 1 (L1) and Level 2 (L2) products. It specifies the content and format of the products generated by the Sentinel-1 Instrument Processing Facility (IPF).

Sentinel-1-Product-Specification (Web)
Sentinel-1-Product-Specification.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-1 Product Specification (old V 2.6)

S1-RS-MDA-52-7441 – Revision 2.6 – 2013-02-18

This document defines the detailed product format for all Sentinel-1 Level 1 (L1) and Level 2 (L2) products. It specifies the content and format of the products generated by the Sentinel-1 Instrument Processing Facility (IPF).

Sentinel-1_Level-1-2_Product_Specification.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-2 Products Specification Document

S2-PDGS-TAS-DI-PSD – Revision 14.5 – 2018-03-14

This document describes in detail the mission User Products.
The Sentinel-2 mission User Products are: Level-0, Level-1A, Level-1B, Level-1C and Level-2A.
The specification of the Sentinel-2 User Products includes the description of the Product Data Items (PDI) composing them.

Sentinel-2-Products-Specification-Document (Web)
Sentinel-2-Products-Specification-Document-14-5.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-2 Products Specification Document (old V 14.4)

S2-PDGS-TAS-DI-PSD – Revision 14.4 – 2018-02-01

This document describes in detail the mission User Products.
The Sentinel-2 mission User Products are: Level-0, Level-1A, Level-1B, Level-1C and Level-2A.
The specification of the Sentinel-2 User Products includes the description of the Product Data Items (PDI) composing them.

Sentinel-2-Products-Specification-Document-14.4.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-2 Products Specification Document (old V 14.1)

S2-PDGS-TAS-DI-PSD – Revision 14.1 – 2016-09-30

This document describes in detail the mission User Products.
The Sentinel-2 mission User Products are: Level-0, Level-1A, Level-1B and Level-1C.
The specification of the Sentinel-2 User Products includes the description of the Product Data Items (PDI) composing them.

Sentinel-2-Product-Specifications-Document-14.1.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-2 Level 2A Product Format Specification

S2-PDGS-MPC-L2A-PFS-V14.3 – Revision 1.0 – 2017-11-13

This document is produced in the context of the development and maintenance of the Level-2A prototype processor Sen2Cor. Its purpose is to define the organisation of the XSD schemas describing Sentinel-2 Level 2A Product Format Specifications. The XSD schemas structure is based on Sentinel-2 Level 1C Product Format Specifications.

S2-PDGS-MPC-L2A-PFS-V14.3.docx (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-2 Level 2A Product Format Specification (old V 14.2)

S2-PDGS-MPC-L2A-PFS-V14.2 – Revision 01 (17?) – 2016-11-25

This document defines the organisation of the XSD schemas describing Sentinel-2 Level 2A Product Format Specifications, and provides the file naming convention (standard an compact products).

[L2A-PFS] S2-PDGS-MPC-L2A-PFS [14.2] (1).pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-2 L2A Product Definition Document

S2-PDGS-MPC-L2A-PDD-V14.2 – Revision 4.5 – 2016-11-25

This document defines the content of the Sentinel-2 Level-2A product. It delivers a collection of the Level-2A related input and output data, covering Scenes, AOT and Water Vapour maps and Quality Indicators. The document has to be considered as a specialisation of the definition provided in [GMES Space Component – Sentinel-2 Payload Data Ground Segment (PDGS), Product Definition Document] for the Level-2A product.

[L2A-PDD] S2-PDGS-MPC-L2A-PDD [14.2] (1).pdf (GAEL Systems)
GMES SPACE COMPONENT: SENTINEL-2 PAYLOAD DATA GROUND SEGMENT (PDGS): PRODUCT DEFINITION DOCUMENT

GMES SPACE COMPONENT: SENTINEL-2 PAYLOAD DATA GROUND SEGMENT (PDGS): PRODUCT DEFINITION DOCUMENT

GMES-GSEG-EOPG-TN-09-0029 – Revision 1.2 DRAFT – 2010-07-25

This document defines the requirements of the Sentinel-2 products to be generated by the Sentinel-2 Payload Data Ground Segment (PDGS).

ProductsDefinitionDocument(PDD).pdf (Web)
ProductsDefinitionDocument(PDD).pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-3 Core PDGS Instrument Processing Facility (IPF) Implementation: Product Data Format Specification – Product Structures

S3IPF.PDS.002 – Revision 1.6 – 2015-02-10

This document provides definitions, structures and conventions of the Sentinel 3 products from Level 0 up to Level 2.

Sentinel-3_Product_Format_Specification_Product_Structures.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-3 User Handbook

GMES-S3OP-EOPG-TN-13-0001 – Revision 1.0 – 2013-09-02

The purpose of this document is to provide various information needed for users to effectively use data obtained through Sentinel-3.

Sentinel-3_User_Handbook.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-3 PDGS File Naming Convention

EUM/LEO-SEN3/SPE/10/0070 – Revision 1D or 1.4 – 2016-06-24

This document provides the File Naming Convention adopted by the Sentinel 3 PDGS for the instrument and auxiliary products.

Sentinel-3_PDGS_File_Naming_Convention.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-3 Core PDGS Instrument Processing Facility (IPF) Implementation – Product Data Format Specification – Level 0 Products

S3IPF.PDS.001 – Revision 1.3 – 2013-02-12

This document provides the Product Data Format Specification of the Level 0 Sentinel-3 products.

D073.7_S3IPF-PDS 001-i1r3- Product-Data-Format-Specification-Level 0.pdf (GAEL Systems)
Sentinel SAFE Control Book – Volume 1 – Core Specifications

Sentinel-5P Input/output data specification for the TROPOMI L01b data processor

S5P-KNMI-L01B-0012-SD – Revision 5.0.0 – 2015-09-22

This document, identified by S5P-KNMI-L01B-0012-SD, describes the data format of the TROPOMI Level-1b (L1b) data products.
The TROPOMI L01b processor developed by KNMI produces L1b data products from L0 input data and auxiliary data products. The TROPOMI L1b data products distinguish radiance, irradiance, calibration and engineering data. Although these products differ in their applicability, the objective is to define a common data format for all TROPOMI L1b products.
This document mainly addresses the output data of the L01b processor (i.e. the L1b data products), providing detailed specifications of the different L1b products. The input data (the Level 0 products and the various auxiliary products) are also identified and summarized in this document.
This document describes the official products that are the result from the Level 0 to Level 1b processing of the data collected by TROPOMI onboard the Sentinel-5 Precursor satellite. For all of the defined data products detailed technical information with respect to their contents and data formats is provided. This allows processing facilities and scientists to develop software for extracting information and in particular to produce higher level (i.e. Level 2) products.
After a short introduction of the TROPOMI system, its mission, the geophysical phenomena studied and the parameters measured by the detectors, the L1b products are described. Product specifications are presented in terms of file naming, file format and file structure. Comprehensive descriptions and specifications of all variables contained in the products are presented.

S5P-KNMI-L01B-0012-SD-input_output_data_specification-5.0.0-20150922.pdf (GAEL Systems)

Sentinel-5P Metadata specification for the TROPOMI L1b products

S5P-KNMI-L01B-0014-SD – Revision 3.0.0 – 2015-09-22

This document, identified by S5P-KNMI-L01B-0014-SD contains the metadata specification of the TROPOMI Level-1b (L1b) data products. The metadata specification is based on ISO 19115 International Geographic Metadata Standard together with the ISO 19115-2 extension for imagery and gridded data and the Earth Observation Metadata profile of Observations and Measurements. In addition, metadata related to the ESA Earth Observation File Format Standard and the CF/netCDF conventions are described.
The TROPOMI L01b processor developed by KNMI produces L1b data products from L0 input data and auxiliary data products. The TROPOMI L1b data products distinguish radiance, irradiance, calibration and engineering data. A common data format for all TROPOMI L1b products has been defined based on netCDF.
This document describes the metadata related to the official products that are the result from the Level 0 to Level 1b processing of the data collected by TROPOMI onboard the Sentinel-5 Precursor satellite.

S5P-KNMI-L01B-0014-SD-metadata-specifications-3.0.0-20150922.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – UV Aerosol Index

S5P-KNMI-L2-0026-MA – Revision 0.11.6 – 2017-06-24

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Aerosol-Index-product (Web)
Sentinel-5P-Level-2-Product-User-Manual-Aerosol-Index-product.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Support products (FRESCO)

S5P-KNMI-L2-0023-MA – Revision 0.11.6 – 2017-06-24

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-FRESCO-Cloud-Support (Web)
Sentinel-5P-Level-2-Product-User-Manual-FRESCO-Cloud-Support.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Aerosol Layer Height

S5P-KNMI-L2-0022-MA – Revision 0.11.6 – 2017-06-24

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Aerosol-Layer-Height (Web)
Sentinel-5P-Level-2-Product-User-Manual-Aerosol-Layer-Height.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level-2 Product User Manual – Nitrogen Dioxide

S5P-KNMI-L2-0021-MA – Revision 0.11.6 – 2017-06-24

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Nitrogen-Dioxide (Web)
Sentinel-5P-Level-2-Product-User-Manual-Nitrogen-Dioxide.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Ozone Profile and Tropospheric Profile

S5P-KNMI-L2-0020-MA – Revision 0.11.6 – 2017-06-24

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Ozone-profiles (Web)
Sentinel-5P-Level-2-Product-User-Manual-Ozone-profiles.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Carbon Monoxide

SRON-S5P-LEV2-MA-002 – Revision 0.11.6 – 2017-06-24

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Carbon-Monoxide (Web)
Sentinel-5P-Level-2-Product-User-Manual-Carbon-Monoxide.pdf (GAEL Systems)

Sentinel-5P TROPOMI KNMI and SRON level 2 Input Output Data Definition

S5P-KNMI-L2-0009-SD – Revision 9.0.0 – 2017-06-14

This document describes the input and output data of the Sentinel-5P/TROPOMI Level 2 products for which the operational code is developed by KNMI: KNMI cloud support product, aerosol layer height, absorbing aerosol index, O3 full profile and O tropospheric profile, NO2 total and tropospheric columns, CO columns and CH4 mixing ratio.

Sentinel-5P-Level-2-Input-Output-Data-Definition (Web)
Sentinel-5P-Level-2-Input-Output-Data-Definition.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Cloud Properties

S5P-L2-DLR-PUM-400I – Revision 00.11.04 – 2017-06-01

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Cloud (Web)
Sentinel-5P-Level-2-Product-User-Manual-Cloud.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Formaldehyde HCHO

S5P-L2-DLR-PUM-400F – Revision 00.11.04 – 2017-06-01

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Formaldehyde (Web)
Sentinel-5P-Level-2-Product-User-Manual-Formaldehyde.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Sulphur Dioxide SO2

S5P-L2-DLR-PUM-400E – Revision 00.11.04 – 2017-06-01

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Sulphur-Dioxide (Web)
Sentinel-5P-Level-2-Product-User-Manual-Sulphur-Dioxide.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Ozone Tropospheric Column

S5P-L2-DLR-PUM-400C – Revision 0.11.04 – 2017-06-01

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Ozone-Tropospheric-Column (Web)
Sentinel-5P-Level-2-Product-User-Manual-Ozone-Tropospheric-Column.pdf (GAEL Systems)

Sentinel-5P TROPOMI Level 2 Product User Manual – Ozone Total Column

S5P-L2-DLR-PUM-400A – Revision 0.11.04 – 2017-06-01

This document describes the technical characteristics of the S5-P/TROPOMI Level 2 products that are needed for efficient and correct use of the data contained.

Sentinel-5P-Level-2-Product-User-Manual-Ozone-Total-Column (Web)
Sentinel-5P-Level-2-Product-User-Manual-Ozone-Total-Column.pdf (GAEL Systems)

Sentinel-5P Level 2 UPAS Processor Input / Output Definition Document

S5P-L2-DLR-IODD-3002 – Revision 3.3.0 – 2017-06-01

The purpose of the Input / Output Data Definition document (IODD) is to provide a precise description of the input and output files as used and generated by the L2 UPAS processor for the Sentinel-5 Precursor.

S5P-input-output-data-spec-TROPOMI-L2-data-processor.pdf (Web)
S5P-input-output-data-spec-TROPOMI-L2-data-processor.pdf (GAEL Systems)

Sentinel 5 precursor/TROPOMI KNMI and SRON level 2 Input Output Data Definition

S5P-KNMI-L2-0009-SD – Revision 9.0.0 – 2017-06-14

This document describes the input and output data of the S5P/TROPOMI Level 2 products for which the operational code is developed by KNMI: KNMI cloud support product, aerosol layer height, absorbing aerosol index, O 3 full profile and O 3 tropospheric profile, NO 2 total and tropospheric columns, CO columns and CH 4 mixing ratio.
The input requirements may differ between near real-time, offline and reprocessing modes. All processors will be run in near real-time, with the exception of CH 4 . The ATBDs for the individual retrieval algorithms describe the use and requirements for input data in detail. There are however some general data types, such as TROPOMI Level 1B, that are required by all algorithms. Special attention is reserved for dynamic input data, such as numerical weather prediction model data to obtain current meteorological fields. This dynamic auxiliary input data needs to be transferred to the processing system and staged specially for the algorithms that require this data. Here the required types of input data are collected, and the formats in which these data sets can be made available are described.
This document also describes the Level 2 output data structure in a netCDF-4 file. Where selected standards allow for choices, the choices are made here. As a guideline open and community standards are used where available.

S5P-KNMI-L2-0009-SD-S5P_level_2_Input_Output_Data_Definition-9.0.0-20170614.pdf (GAEL Systems)

RINEX – The Receiver Independent Exchange Format

RINEX 3.03.IGS.RTCM – Revision 3.03 – 2015-07-14

This document describes the RINEX Format (Receiver Independent Exchange Format) – Version 3.03.

rinex303.pdf (Web)
rinex303.pdf (GAEL Systems)

RINEX – The Receiver Independent Exchange Format (old V 3.00)

rinex300_2007_11_28 – Revision 3.00 – 2007-11-28

This document describes the RINEX Format (Receiver Independent Exchange Format) – Version 3.00.

rinex300.pdf (Web)
rinex300.pdf (GAEL Systems)

Sentinels POD Service File Format Specifications

GMES-GSEG-EOPG-FS-10-0075 – Revision 1.22 – 2018-01-18

The Sentinel Missions (Sentinel-1, Sentinel-2 and Sentinel-3) embark a common GPS Receiver and the following types of orbits are generated for each Sentinel mission:

• On ground Precise Orbit Determination (POD) solutions;
• On-board Navigation solutions.

The purpose of the document is to define the product structure and the content of each file generated and delivered by the POD Service Centre and the S-3 NRT POD IPF across its interfaces to the Sentinels (1, 2 and 3) PDGSs.

GMES-GSEG-EOPG-FS-10-0075_v1.22_Sentinels POD Service File Format Specification.pdf (GAEL Systems)

Sentinels POD Service File Format Specifications (old V 1.22-Draft)

GMES-GSEG-EOPG-FS-10-0075 – Revision 1.22-Draft – 2017-06-30

The Sentinel Missions (Sentinel-1, Sentinel-2 and Sentinel-3) embark a common GPS Receiver and the following types of orbits are generated for each Sentinel mission:

• On ground Precise Orbit Determination (POD) solutions;
• On-board Navigation solutions.

The purpose of the document is to define the product structure and the content of each file generated and delivered by the POD Service Centre and the S-3 NRT POD IPF across its interfaces to the Sentinels (1, 2 and 3) PDGSs.

GMES-GSEG-EOPG-FS-10-0075_v1.22draft_Sentinels POD Service File Format Specification.doc (GAEL Systems)

External Auxiliary Data Providers to Sentinels POD Service ICD

GMV-GMESPOD-ICD-0002 – Revision 1.12-Draft – 2017-06-30

This document describes the External Auxiliary Data Providers to Sentinels POD Service ICD. This document describes details of the interface between the external auxiliary data providers and the Sentinels POD Service.

GMV-GMESPOD-ICD-0002_v1.12draft_External Auxiliary Data Providers to Sentinels POD Service ICD.docx (GAEL Systems)

Copernicus POD Service (CPOD) Service Level Agreement

GMV-GMESPOD-SLA-0001 – Revision 1.5-Draft – 2017-06-30

This document describes the Copernicus POD Service (CPOD) Service Level Agreement for the Provision of the Precise Orbit Determination Service for the Sentinel missions.

GMV-GMESPOD-SLA-0001_v1.5draft_Service Level Agreement between ESA and the POD Service.docx (GAEL Systems)

The SPOT Scene Standard Digital Product Format

S4-ST-73-01-SI – Revision 1.2 – 1997-11-17

This document describes the format of the “SPOT scene” digital products which are produced and distributed by SPOT IMAGE. These digital products are delivered, either on magnetic tapes (6250 Bpi) or on CD-ROM.
This format is also called the “CAP format”, since it has been designed to be produced by the Centre d’Archivage et de Pretraitement (CAP) located at SPOT IMAGE premices, in Toulouse as well as at SSC-Satellitbild facilities, in Kiruna (Sweden) and at SPOT IMAGE Corporation facilities in Reston (VA, U.S.A.). Some Direct Receiving stations are also capable of providing such a format.
This format concerns the SPOT scenes which are processed at level 1A, 1B or 2A. For other digital products (level 2B, Ortho-images, Imagemaps like SPOTView), the format is the GIS-Geospot format (or ‘DIMAP’ format) which is outside the scope of this document.

(S4 CAP) S4-ST-73-01-SI_ed01_rev02.pdf (GAEL Systems)
CEOS Guidelines on Standard Formats and Data Description Langages

Dimap Dictionary SPOT Scene profile Version 1.1.2

Revision 1.1.2 – 2006-05-09

This document describes the SPOT DIMAP format.

SPOT-Scene-1.1.2.pdf (GAEL Systems)

Schema: SPOT Scene

2002-01-22

This document describes the SPOT DIMAP format.

dimapv29.pdf (GAEL Systems)

SPOT SATELLITE GEOMETRY HANDBOOK

S-NT-73-12-SI – Revision 1.0 – 2001-01-15

This document describes the geometry by which Earth observation images of SPOT missions are acquired. The proposed viewing model allows to produce enhanced products at various processing levels. Equations are given to generate standard level 1A, 1B and 2A images. The provided model allows computing and controlling orthorectified images to produce space maps with high accuracy location on the Earth.
This handbook deals with the whole SPOT mission series (SPOT 1, 2, 3, 4 and 5) summarizing the differences between these missions in term of payload, auxiliary data and image geometry.
Being first intended to software editors, the handbook pays a particular attention to precisely locate the auxiliary data involved within the equations to be implemented. This location is given in reference to the CEOS format (CAP) and to the new DIMAP format of SPOT products.

S-NT-73-12-SI-Geometry-Handbook.pdf (GAEL Systems)

TerraSAR-X Science Plan

TX-PGS-PL-4001 – Revision 1.0 – 2014-11-25

The purpose of this document is to provide background of the TerraSAR-X mission for investigators who intend to use TerraSAR-X data for the scientific purposes. It describes data policy issues, the procedure for getting access to the TerraSAR-X data and pricing issues.

TSX-Science-Plan.pdf (GAEL Systems)

TerraSAR-X Ground Segment Basic Product Specification Document

TX-GS-DD-3302 – Revision 1.5 – 2008-02-24

This document specifies the operational TerraSAR-X basic products generated at PGS for scientific and commercial use. In the context of the project the products are called basic products because they are the basis for higher level information products. The document summarizes the operation modes of TerraSAR-X and the characteristic parameters. It describes the product design criteria, lists the different product types and introduces their structure.
The document in hand is supplemented by the Level 1b Product Format Specification document specifying the binary data formatting and the detailed annotation parameters of the product.

TX-GS-DD-3302_SAR_Basic_Products_1.5.pdf (GAEL Systems)

TerraSAR-X Ground Segment Basic Product Specification Document (old V 1.2)

TX-GS-DD-3302 – Revision 1.2 – 2005-05-09

This document specifies the operational TerraSAR-X basic products generated at PGS for scientific and commercial use. In the context of the project the products are called basic products because they are the basis for higher level information products. The document summarizes the operation modes of TerraSAR-X and the characteristic parameters. It describes the product design criteria, lists the different product types and introduces their structure.
The document in hand is supplemented by the Level 1b Product Format Specification document specifying the binary data formatting and the detailed annotation parameters of the product.

TX-GS-DD-3302_SAR_Basic_Products.pdf (GAEL Systems)

TerraSAR-X Ground Segment Level 1b Product Format Specification

TX-GS-DD-3307 – Revision 1.3 – 2007-12-10

This document defines the format of the level 1b product components as introduced in Basic Product Specification. In that sense it is an annex document to Basic Product Specification which details the image file and preview data representation and gives a comprehensive list of the product annotation parameters.

TX-GS-DD-3307_Level-1b-Product-Format-Specification_1.3.pdf (GAEL Systems)

TerraSAR-X Ground Segment Level 1b Product Format Specification (old V 1.1)

TX-GS-DD-3307 – Revision 1.1 – 2005-10-08

This document defines the format of the level 1b product components as introduced in Basic Product Specification. In that sense it is an annex document to Basic Product Specification which details the image file and preview data representation and gives a comprehensive list of the product annotation parameters.

TX-GS-DD-3307_Level-1b-Product-Format-Specification_1.1.pdf (GAEL Systems)

TerraSAR-X Ground Segment Level 1b Product Format Specification (old V 1.2)

TX-GS-DD-3307 – Revision 1.2 – 2006-03-27

This document defines the format of the level 1b product components as introduced in Basic Product Specification. In that sense it is an annex document to Basic Product Specification which details the image file and preview data representation and gives a comprehensive list of the product annotation parameters.

TX-GS-DD-3307_Level-1b-Product-Format-Specification_1.2.pdf (GAEL Systems)